"Megasat Wireless HD Transmitter Premium Wireless Full HD transmission"
The Wireless HD Sender Premium allows wireless transmission of all HDMI-enabled devices. Replace the HDMI cable wirelessly and place the HDMI-compliant TV or projector in the location of your choice.
The transmitter has an HDMI input (for example for satellite receivers) and an HDMI output to the television, which can also loop through the signal in standby mode. The supplied infrared sensor allows you to operate your HDMI device as usual with the original remote control. The transmission of the HD signal is not delayed and is suitable for all HD formats (up to 1080p).
Due to the extra strong antennas, the signal range is up to 100 meters and is thus ready for use throughout the house. Technical specifications: Video resolution up to 1080p (Full HD) HDMI compatible up to HDMI 1.3 HDCP compatible up to HDCP 1.2 Supported audio formats: PCM Maximum transfer rate: 10.2 Gb / s TMDS signal (input / output): 0.5 ~ 1.5 Vp-p (TMDS) DDC signal (input / output): 5 Vp-p (TTL) Max. Length of HDMI cable: = 5 m (AWG26, HDMI 1.3 standard) Supports IR passback with a frequency of 20-60 KHz Wireless transmission method: 5.8 G Max. Transmission range: 100 m (without obstacles) Transmission delay: = 200 ms Operating temperature: 0 ° C ~ 50 ° C Storage temperature: -10 ° C ~ 70 ° C Reset button on the transmitter and receiver Power supply (transmitter): DC 5V, 2A Power consumption (receiver): <7 watts Power supply (transmitter): DC 5V, 2A Power consumption (receiver): <5 watts