FREE SHIPPING

Neostar NTR-830PA 8 Chanel 4K UHD PoE NVR 3840x2160p H.265 VCA CMS HDMI 4K IP Recorder

€349.00

plus Shipping in DE 0,-*

Free shipping in Germany!

1 pieces in stock, more are ordered

Guaranteed shipping today, 28.10.2021
Order within 5 Hours, 48 Minutes and 12 Seconds this product.
VIDNTR02
With the powerful 4K network video recorder Neostar NTR-830PA 8 network cameras up to 8MP... more
"Neostar NTR-830PA 8 Chanel 4K UHD PoE NVR 3840x2160p H.265 VCA CMS HDMI 4K IP Recorder"
With the powerful 4K network video recorder Neostar NTR-830PA 8 network cameras up to 8MP resolution can be recorded and played back. The NVR has an integrated PoE switch so that network cameras can be connected directly to the device. The detection and configuration of all Neostar network cameras takes place automatically and automatically immediately after connection. The highest supported input resolution per network camera channel is 8 megapixels (3840 x 2160p).

The 8-channel UHD NVR allows you to record videos with a maximum resolution of 3860 x 2160p (8MP) on all 8 channels simultaneously. Playback is possible in 1080p (8 channels) or in 8MP resolution (2 channels). The focus is also on the good image quality with the lowest possible network bandwidth and economical consumption of storage capacity.

Features:
8 IP PoE camera channels
8.0MP (3840 × 2160p)
80Mbit / 160Mbit
Video Content Analysis
Multi-Stream
H.265 / H.264 + / H.264
Backup via USB, LAN
iOS and Android apps
HDMI 4K UHD / VGA
230V AC

8 megapixel 4K UHD network camera recording
Meanwhile, the latest Neostar and Balter network cameras support significantly higher resolutions than Full HD. These are 5 megapixels (2592 x 1944p) and 8 megapixels (3840 x 2160p) for most network cameras. To enable the use of such high-resolution network cameras and to enjoy all the advantages of both recording and playback, NVR processor performance has been significantly increased. This performance enhancement allows simultaneous capture of 8 high-resolution (8MP) network cameras with high frame rates.

Power over Ethernet (PoE)
The network video recorder has a built-in 8-channel PoE switch, to which all Neostar network cameras can be connected and added to the system with just one click. External power supply and installation of an additional power cable for each camera is completely eliminated. Thus, the PoE feature brings advantages of easy installation of network video surveillance systems and saves considerable installation costs.

operator interface
The internal user interface was designed in a way that allows even inexperienced users to navigate as easily as possible and to make changes to the settings as needed. Both the distribution of the most frequently used functions and graphic design meet high industry standards. Support for alternative browsers such as Google Chrome, Opera and Safari, in addition to the Internet Explorer, enables seamless operation of the system even without using ActiveX.

High-resolution playback
The latest video surveillance technology and HDMI + VGA monitor interfaces support real-time playback on a 4K UHD monitor via HDMI or a Full HD monitor via VGA. Recording and transmission over the network is done in H.265 / H.264 + / H.264, which requires significantly lower bandwidth and storage capacity for good video quality. Two 3.5 "SATA hard drives with a total capacity of 16TB (8TB / HDD each) can be installed in the network video recorder.

recording modes
In addition to the continuous recording are motion detection or alarm activation, with pre- and post-alarm recording, and the continuous recording with specially set parameters such as vacation planning and time determination. In this mode it is individually possible for each channel to define the activation of recording parameters after the event (motion detection, alarm activation). You can also adjust the frame rate, resolution, image quality and bitrate. These parameters can be set independently of the continuous recording setting. After the occurrence of an event such as motion detection or alarm activation, the recorder automatically switches to the event recording mode, usually with higher recording parameters. In the remaining time, the recording is carried out continuously.

Video Content Analysis
The basic video content analysis (VCA) allows individual and independent setting of each individual channel for intelligent image analysis. Integrated were detection of the crossing of virtual lines and alarming when exceeding a previously defined area by one or more objects. The diagnostic quality depends very much on the respective image quality and prevailing environmental conditions.

Network connectivity
The network video recorder has an RJ-45 LAN port over which the network connection based on TCP / IP or PPPoE can be realized. Supported protocols and network services such as DHCP, SNMP, FTP, SMTP, Email, NTP, DNS, DDNS, UPnP are also available. The connectivity with the recorder is made through a connection with popular web browsers (IE, Google Chrome, Opera, Safari), the free Neostar CMS client software (PC) or Neostar or NeostarHD apps for iOS (iPhone, iPad) or Android manufactured.

Central Monitoring Software
Neostar CMS client software enables the display, control and configuration of Neostar recorders and cameras over the network. The application allows to manage up to 256 devices on up to 4 monitors. A maximum of 64 cameras can be displayed on one screen, with the recommendation being 16 to 24 cameras per screen, depending on the size of the monitor. In addition to display and configuration, the CMS allows remote playback, alarm notification, bi-directional audio playback and the use of multi-level maps to display individual cameras.

Neostar and NeostarHD iOS and Android apps
Neostar apps are mobile applications for smartphones and tablets based on the Android and iOS operating systems. Remote viewing of live images and playback of archive recordings is made possible by the apps. Not only analog, HD-SDI and network video recorders are shown, but also all Neostar IP cameras.

Delivery:
NEOSTAR 8-channel 4K UHD PoE NVR, 3840x2160p, 80Mbit, H.265 / H.264, VCA, CMS, HDMI 4K, 230V AC - NTR-830PA
Cold device cable 230V
USB mouse
Software CD
Quick Start Guide (English)

  • VIDNTR02
  • Read, write and discuss reviews... more
    Last seen