"Megasat Sat Meter HD 4 Combo V2 2,4 Zoll DVB-S2/C/T2 Satellite/Cable/DVB-T2 Finder"
The HD 4 Combo is a handy meter and best suited for fast and accurate satellite search. It is possible to measure DVB-S / -S2, DVB-T / -T2 and DVB-C / -C2 signals. The built-in LCD display offers a screen diagonal of 2.4 inches (6 cm). The operation is a breeze with the clear and clearly structured screen interface. In the live measurement, all important information is displayed and, if necessary, the signal level and quality can be enlarged. With the transponder control you have the possibility to judge different levels at the same time. This is useful when calibrating Quattro LNBs.
Satmessgerät HD 4 Combo To assess the signal of the satellite system and to analyze possible reception errors, use the spectrum analysis, which takes place in near real time. Due to the constantly updated presentation of the diagram, the spectrum is changed immediately as the mirror moves.
Angle calculation for quick alignment The angle calculation helps you to determine the vertical and horizontal angle of the antenna, because depending on the location, the elevation and the azimuth change. Simply enter the site data and the meter will quickly calculate the appropriate angle settings for the mirror. Thus, the desired satellite can be found faster. The built-in compass function makes it easier for you to calculate the angle. If the meter is turned or tilted, the current angle is automatically displayed on the screen. Alternatively, the selected satellite can be graphically displayed to quickly determine the correct position.
DiSEqC monitor for quick control The DiSEqC monitor gives you the opportunity to check switching commands of the receiver or TV in order to locate faults on the device or system. Simply connect the LNB output of the receiver / TV to the LNB input on the meter. You can then check the DiSEqC and Unicable commands and circuits on the meter.
General technical features of the Megasat HD 4 Combo Setter: Measurement of DVB-S / -S2 / -T / -T2 / -C / -C2 2.4 inches (6.0 cm) display Optical and acoustic signal level display Mini USB port for firmware updates Screw connections for easy change of the F sockets Reset button Power supply: AC 100-240V, DC 12V, 1A Li-ion battery (7.4 V / 1400 mA / h)
Measurement of satellite signals (DVB-S / S2): Frequency range: 950 - 2150 MHz Level range: 30 ~ 90 dBµV LNB voltage: 13/18 V, max. 500mA LNB short circuit indication and protection Show: PWR / C / N / MER / BER / Signal strength and quality DiSEqC 1.0 / 1.1 / 1.2 / USALS Auto DiSEqC function Unicable I & II (EN50494 / EN50607) spectrum analysis Angle calculation of azimuth and elevation
Measurement of terrestrial signals (DVB-T / T2): Frequency range: 44 - 870 MHz Level range: 30 ~ 100 dBµV Display: PWR, VBER, LBER, SNR, CBER Scope display Automatic and manual program search
Measurement of cable signals (DVB-C / C2): Frequency range: 44 - 870 MHz Level range: 30 ~ 100 dBµV Show: CBER, PER, LBER, SNR, symbol rate Tilt Display Automatic and manual program search
Connections: 1x mini USB 1x F-connection 1x RF connection 1x DC 12 volt input
Delivery: Satmessgerät HD 4 Combo 230 volt power supply 12Volt car charger Protective cover incl. Carrying strap F Coaxial operation manual