"Megasat Sat Meter HD 5 Combo OLED DVB-S2/S2X/C/T2 Satellite/Cable/DVB-T2 Multistream Finder"
Megasat HD 5 Combo is an accurate measurement device for all television signals (satellite, cable and terrestrial) and is a great help in aligning your satellite dish. The meter is even suitable for measuring UHD or 4K frequencies. The housing of the HD 5 combo meter is also made of high quality aluminum. In the front of a 5-inch AMOLED color display is embedded, on which the frequencies, etc. can be displayed. To measure in low light conditions, the meter also has a small gimmick a small LED light. The meter comes with a wide range of accessories.
Align the satellite dish with the Megasat HD 5 Combo Setter
To align your satellite dish, first orientate yourself to the signal level and signal quality. These can be magnified with the HD 5 Combo Setter at the touch of a button and then output on the display on the front. To check the received TV picture, use the integrated receiver of the HD 5 Combo Setter. It can play all free-to-air digital programs in SD and HD. In addition, a customizable station list is available with the most popular programs. The menu of the HD 5 combo meter allows you to search for stations and frequencies at any time and to add new ones.
Detect sources of error and align your satellite dish faster
For further verification of the signals, the spectrum analysis can be used. This helps you find errors faster and align your satellite dish much faster. On the other hand, the constellation analysis gives you further viewing options for the signals. It can be, for example, You can see at a glance whether the signal arrives scattered or bundled, but also other data such as dBm, CNR, BER can be displayed.
General technical features of the Megasat HD 5 Combo Setter: - 5 inches (12.7cm) AMOLED color display - Measurement of all types of reception (DVB-S / -S2 / -S2X / -C / -C2 / -T / -T2 H.264 and H.265 / HEVC) - Live TV playback - Video decoding: MPEG4, MPEG4-AVC / H.264 and H.265 / HEVC, Hieg Tier @ Level 4.1, MGEP2 ISO / IEC 13818-2 MP @ HL / ML - Audio decoding: MPEG1, MPEG2 ISO / IEC 13818-3 Layer I & II - Integrated speakers - Li-ion battery (7.4V / 5000mA / h) with quick charge function - LED light on the back, to measure the system even in low light conditions - High quality aluminum housing - USB port for firmware updates and storage of measurement data, program list, ... - Power supply: AC 100-240V / DC 12V, 2A - Antenna voltage: 5V / 12V (max 200mA) - Dimensions (W x H x D): 215 x 156 x 45 mm (dimensions and weight may vary depending on configuration and manufacturing process.) - Weight: 900 g
Measurement of satellite signals (DVB-S / S2 / S2X): - DVB-S frequency range: 950 - 2150MHz - DVB-S LNB Voltage: 13/18 V, max. 300 mA - DVB-S LNB power: Evaluation of LNB power (mA) - DVB-S level range: 35 ~ 90dBµV - Input resistance: 75O - Measurement of Ultra HD signals - Unicable I & II (EN50494 / EN50607) - DiSEqC 1.0 / 1.1 / 1.2 / USALS (Automatic detection of DiSEqC 1.0) - Automatic satellite detection (NIT) - Calculation of the angle of rotation and inclination of the antenna - Search mode: Automatic, Manual, Blindscan - LNB short circuit protection with LED indication - Signal strength / quality display, dBm, CNR, BER - spectrum and constellation analysis - Cable identification on Quattro LNB (transponder control)