DUR-line UCP 21 Single Cable Solution with Power Supply for 2 Participants

The DUR-line UCP 21 enables you to use 2 satellite receivers with just one coax cable. Any Unicable-compatible receiver or satellite tuner on your television set that complies with the European standard EN 50494 can be used for this purpose. The optional power-saving power pack ensures safe switching in poor reception conditions and longer cable runs.

The DUR-line NT 18-1200F AC/DC is a high-quality power supply unit with a stabilized output voltage of 18 V DC and a nominal current of 1.2 A. It is used for multi-switches such as Kathrein, Polytron, Inverto, Jultec, Spaun, DUR- line, and other electronic devices.

Features
- 2 receivers/TV or twin tuners via 1 cable
- Unicable/SCR technology according to standard EN 50494
- Low power consumption (120 mA at 18V)
- Forwarding of Terr./DVB-T signals
- Supports 2 satellites (8 IF levels)
- Short-circuit proof (for power supply unit)

Technical Info (DUR-line UCP 21)
- Frequency range SAT: IN 1: 85-2.400 MHz/IN 2: 950-2.400 MHz
- Input level: 65 ... 95 dBµV (EN50083-2 interference radiation)
- Output level: 85 dBµV (AGC regulated)
- Power supply connection: F socket/18 VDC/at least 500 mA (mandatory for LNB operation)
- Participant bands: Band 1: 1,210 MHz/Band 2: 1,420 MHz
- Ambient temperature: -20 .. + 40° C
- DC current consumption: approx. 120 mA (without power supply unit)/approx. 15 mA (with power supply unit)

Technical Info (DUR-line Power Supply NT 18-1200 F)
- suitable for many products in the satellite and electronics sector
- with the protective choke to reduce interference radiation
- Input voltage: 100 - 240 V AC - 0.6 A
- Output voltage: 18 V/1200 mA
- Cable length: 1.50 m with F connector
- Input frequency: 50/60 Hz

Delivery
1x DUR-line UCP 21 Single-Cable Solution
1x DUR-line NT 18-1200 F - Power Supply Unit
1x User Instruction

Item no.: EINZUB003N