Inverto Ultra IDLT-QDL412-ULTRA-OPN Quad High-Gain PLL LNB (40mm, 4K, 8K, DVB-S2X-Compatible)

Inverto developed this high-performance ultra-LNB specifically to meet the need for outstanding reception under the wheels of the satellite footprint, small dish sizes, or long coaxial cables. Thanks to the superior front-end components and the innovative feedhorn design, this LNB offers a higher conversion gain with a low noise figure and the best phase noise performance.

Features
- Novel feed horn design
- Outstanding phase noise performance, DVB-S2X compatible with support for Ultra HD TV (4K and 8K)
- Excellent cross-polarization isolation
- Very low noise levels
- Superior noise figure with high gain
- High 4G immunity
- Greatest reliability

The combination of innovative feed horn design, higher specified components, excellent cross-polarization isolation and advanced filter design enable improved handling of interfering and other spurious signals. Compared to standard LNBs, this LNB offers a leap in the overall reception performance and enables the reception of ultra-high-definition TV transmissions in 4K or even 8K.

This LNB offers a leap in the overall reception performance compared to standard LNBs, enables signals to be received from a satellite, its distribution to four set-top boxes with single tuners (or two STBs with twin tuners each), and is ready for ultra high definition TV broadcasts in 4K or 8K resolution. Manufactured according to the strictest requirements and the highest industry standards, this unique LNB is an ideal solution for difficult reception conditions.

Technical Info
- Low band input frequency range: 10.7 GHz ~ 11.7 GHz
- Low band output frequency range: 950 MHz ~ 1950 MHz
- Oscillator frequency (LO) low band: 9.75 GHz
- High band input frequency range: 11.7 GHz ~ 12.75 GHz
- High band output frequency range: 1100 MHz ~ 2150 MHz
- Oscillator frequency (LO) high band: 10.6 GHz
- Noise figure: 0.2 dB typ. (0.7 dB max.)
- LO temperature drift: ± 2.0 MHz max.
- LO initial accuracy: ± 1.0 MHz max.
- LO phase noise @ 1 kHz: -70 dBc / Hz
- LO phase noise @ 10 kHz: -80 dBc / Hz
- LO phase noise @ 100 kHz: -90 dBc / Hz
- LO phase noise @ 1 MHz: -100 dBc / Hz
- Gain: 60dB ~ 70dB
- Gain ripple (over 26 MHz bandwidth): 1 dB max. (Peak-to-peak)
- Gain fluctuation (in full band): 4 dB max. (Peak-to-peak)
- Image frequency suppression: 50 dB min.
- 3rd order intermodulation products - ICP3: +10 dBm min
- 1 dB compression point (@ output): 0 dBm min.
- Cross polarization isolation: 22 dB min.
- Control signal Ca (V): 10.0 V ~ 14.0 V
- Control signal Cb (H): 16.0 V ~ 20.0 V
- Control signal Cc (band switching): 22 kHz ± 4 kHz
- Output VSWR: 2.0: 1 max.
- In-band interference: -65 dBm max.
- Current consumption: 200mA max. (10 VDC ~ 20 VDC)
- Operating temperature: -30 ° C ~ +60 ° C
- Output impedance: 75 O (F-type)
- Output connector: F type (female)
- Dimensions: 142 x 79 x 48 mm
- Weight: 177.4 g

Delivery
1x Inverto Ultra IDLT-QDL412-ULTRA-OPN Quad High-Gain PLL LNB

Item no.: LNBQUA084

WEEE-Number 88752832